Aqua Massage - Experience a Fantastic Water Jet Massage without getting undressed or wet! 36 Computer Controlled Water Jets simulate a personal "Finger Tip" Massage with adjustable Water Pressure, Temperature, and Pulsating Frequency to Relieve Pain and Tension in only a 10-15 Minute Session.

The Aqua Massage is great for a kiosk in a Mall; a Travel Plaza, as a profit center for Spas, Salons, and Health/Fitness Facilities; home use; or an added Profit center. No additional staff is required to operate the Aqua Massage. EASY TO OPERATE. The Aqua Massage DOES NOT require plumbing, post-session cleanup, or draining of the water.

Advantages

• The user remains clothed and dry for privacy and comfort with no post-session clean-up of water or oils.
• The spray bar travels back and forth, massaging the full length of the body or it may easily be programmed to concentrate on a specific area.
• An inverted V-shaped spray bar with 36 water jets is contained under an acrylic canopy. The powered canopy opens and allows easy access for the client to lie down on the cushion.
• The water jets are separated into four groups of 9 jets each. The inner 2 groups (18 jets total) work together and the outer 2 groups work together to simulate a finger tip massage from the center of the body to the sides of the body.
• The machine's water jets can be adjusted from 2 to 10 pounds of water jet force (similar to pressing on the body with 18 finger tips) to suit the sensitivity of the client and with a consistency that is hard to match with manual massage.
• The water temperature can be adjusted from approximately 90ºF - 104ºF using the electronic thermostat.
• The pulsating water jets can be adjusted from a relaxed 2 cycles per second up to an invigorating 10 cycles per second. The pulsation can be varied independent from the water pressure for maximum effect.
• A water proof barrier conforms to the user, allowing a full surface massage on three sides of the body. The best alternative to traditional methods for today's life-styles.
• The Aqua Massage is self-contained. No plumbing is required. No post-session clean-up or water disposal is necessary.

Options

• SDM/ASI - Single Direction Massage, Automatic Speed Increaser, and adjustable cushion system upgrade.
• HP - Provides 10% - 15% stronger water jet force.
• Electronic Session Counter - Use to aid in accurate record keeping. A photoelectron sensor certifies the machine is occupied. Each occupied session will be registered on digital display. All time positions are recorded independently.
• Stainless Steel Token Activated Timer Control - Replaces the "Reset" button and function. Uses one token to reset the hand control timer to the time set by the key switch.
• Remote Mounted Timer Key Switch & Reset Button -Used where centralized control of the "Time" and "Reset" functions are required. Specify cable run distance from the machine to the central control location. Includes 50 feet of cable.
• Chiller System - Used for non-air-conditioned locations or for applications where water temperatures less than 90° F are required. Chiller systems are designed to meet specific customer requirements.